The following options are available for these cases:

Case Marking ID Plates
All standard cases can be provided with a permanent ID plate. The 4"x4"x.020" aluminum plates are riveted to the case in a recessed location. Required for most Military and DEPMED applications. Set ups and leadtimes apply. P/N 21-IDP-1 Price $29.00 $29.00
Case Marking Label Set
All cases can be configured with ATA container labels, including"up" arrows, "handle with care" and "delicate instrument" labels. P/N 21-LBL-1 Price: 28.00 $28.00
Case Marking, Card Holder
Secure metal card holder installed with laminated return address or company logo. The card holder is secured with rivets on all 4 sides. P/N 21-CHLC-1 Price $26.00 $26.00
Desiccant Holder
3.37"x12" steel basket to hold standard Mil-D-3464 desiccant bag. Holder comes with screw on lid and is accessible from case exterior. Holder cover is airtight and watertight, 4.5" diameter. Three week lead-time. P/N 21-DSC-4 $244.00
Edge Casters
Edge casters are heavy duty corner mounted wheels that consist of a cast aluminum housing, a 200# load roller blade wheel and a steel axle. Ideal for shipping cases, computer cases, rolling cart cases and rackmount cases . P/N 21-EC-2 Price:$82.00 $82.00
Edge Casters and Pull Handle
Most standard workstation. monitor, and shipping cases can be provided with a heavy duty protected pull handle and 2 sealed edge casters. 21-ECPH-2 Price: $208.00 $208.00
Forklift Case Options
Larger Single lid shipping cases can be configured with molded forklift bumpers to allow standard forklifts and pallet jacks to pick up the cases. In addition to providing forklift capability, the bumpers provide some additional shock and vibration protection. Fork lift bumpers, not available for all cases. P/N 21-FLB-6 $289.00
Humidity Indicator
Through wall indicator of relative humidity inside of an airtight/watertight case. The front bezel indicates three humidity ranges, 20% 30% and 40%. The Indicator resets for future use. Must be ordered with Pressure relief valves. P/N21-HID-3 Price $45.00 $45.00
Large Storage Pouch
The zippered pouches can be mounted in either rackmount case or shipping case lids. Pouches are typically used for keyboards, cables, manuals, casters, etc. Large pouches are available in 2 sizes, 22"x10" or 22"x16". P/N 21-POU-16. Price: $144.00 $144.00
Lifting Rings
Welded rings provide hoisting and tie down attachment points. Rings are spring loaded and have a 1000lb/ring rating. The rings can be installed on either rackmount or standard shipping cases. Rings are available in plated steel or stainless steel. P/N 21-LRS-4 Price: $136.00 $136.00
Locking Cable Hasp
The locking cable hasp is a fully recessed locking mechanism that utilizes a tamper resistant stainless steel wire to prevent theft of the case contents. 21-LCH-1 Price: $16.00/ea. 4 required for RMC cases $18.00
Padlock Hasp
Cases can be outfitted with padlock hasps for additional security. P/N 21-PLH. $18.00 $18.00
Pressure Relief Valve
Automatic pressure relief valves used on water tight & airtight cases to maintain the proper pressure differential. The standard PRV range is +/- .5 PSID. The pressure relief valves are mounted in the protected recesses of the cases. P/N 21-PRV. $50.00 $50.00
Removable 3.5" Casters
3.5" diameter swivel casters, permanently mounted to base or side of case. 200# load rating, Ideal for moving cases on indoor surfaces or smooth paved surfaces. P/N 21-CAR-3. $310.00
Shipping Card Holder
Secure card holder for shipping or return address labels. P/N 21-SCH-1 $26.00 $26.00
Small Storage Pouch
Cases can be configured with small or large storage pouches. The zippered pouches can be mounted in the case lids and be used for keyboards, cables, manuals, casters, etc. Small pouches measure 12x12". P/N21-POU-12. $74.00
Stainless Steel Hardware
Recommended for cases that are used in excessive saltwater or chemical environments. Available in Clear and flat Black anodized finish. **Case Dependent Price**